 About this Section:
Ceiling Supports provide safe and
sturdy means of gaining high conveyor elevations. Used when
maximum utilization of floor space is needed or when required
height exceeds floor support capability. 5/8 inch fully threaded
steel rod connects to 1-1/2 in. I.D. (1/9 in. O.D.) support which
bolts to underside of conveyor with "U" brackets.
Ceiling Supports can be supplied with gravity or powered
conveyors. It is recommended that guard rails be used on conveyors
that are ceiling hung.
Some things to consider when adding casters:
- Make sure the overhead structure is capable of supporting the weight
of the conveyor when it is fully loaded with the heaviest product.
An architect is a good resource to determine if a roof structure is
capable of handling the added load. An engineer may be required to
determine what is required to connect the support to other structures.
- It is recommended that guard rails be used on conveyors
that are ceiling hung.
- Additional bracing may be required to prevent the conveyor from
swaying in certain conditions such as, starting and stopping.
|
